At the bench
iPad screens are glued down, so we heat and cut the panel free, replace only the layer that failed, then re-bond it. That is why we ask for a couple of hours rather than a few minutes.
45–90 min
glass and touch
Same day
most iPad jobs
90 day
parts warranty
What we fix
The faults we see most often
Cracked glass with a working picture
The glass and digitizer are replaced together, so multi-touch, Apple Pencil pressure and brightness all behave like new again.
Lines, blotches or dead spots on the LCD
The LCD panel is separated from the glass and replaced in-shop, with the backlight and frame checked while it is open.
A strip of the screen that will not respond
That is a digitizer failure rather than glass damage. We test the touch grid before deciding which part you actually need.
Battery that drains while asleep
A tested battery is fitted, charge cycles are reset, and the charging board is checked in the same visit.
Charging port or power faults
Lightning and USB-C ports replaced on the board or the port flex, whichever your model uses, then tested under load.
Bent frame and liquid damage
Frame straightening, ultrasonic cleaning and board-level work quoted after inspection, never before.
Services & turnaround
What it takes, and how long it sits on the bench
iPad mini, Air, standard iPad and both Pro sizes are handled on site. Very old models are quoted before we order a panel.
Models covered
iPad models we repair
Every iPad generation we can still source panels and batteries for is listed below.
Questions
Before you come in
Same-day service
Handled with care, finished the same day.
Tell us the device and what happened. We confirm a time slot and have the part ready before you arrive.